Click here to return to the Home PageClick here to return to the Home PageClick here to return to the Home Page  
  Click here for a complete listing of all BonEHeaD prioductsClick here for BonEHeaD dealer information or to find a dealerClick here for frequently Asked Questions about our productsClick here to find out about the latest new BonEHeaD products and moreClick here to return to the Home PageClick here to find out more about BonEHeaD's military productsClick here for downloadable forms for all BonEHeaD ProductsClick here for Shipping/Mailing info for BonEHeaD CompositesClick here to find out more about BonEHeaD Composites  
   
 
Bonehead Composites is the Leader in Carbon Fiber / Composite Products for Extreme Sports.

Our parts are made by hand lay-up (a process where the fabric is cut and applied to molds using epoxy resin). Parts made using this process are cured by a combination of heat, pressure, vacuum and inert atmosphere.

We start by placing the parts into a plastic, temperature resistant bag and into the computer controlled Autoclave (pictured). A vacuum is applied to the bag to remove air and volatile products. The autoclave is sealed. The computer controls the heat, pressure and cure time. The result of this process is a lightweight yet strong product.

Autoclave

Our Autoclave makes our products superior to the rest
and is the mainstay of our manufacturing process.

For quotes on custom work
and designing please contact us directly.

 WARNING: Please Read!
 Bonehead Composites/JFChristopher Inc. has made every attempt to build our products to be as safe as possible. However, Bonehead Composites/JFChristopher Inc. is not responsible for any injuries or losses sustained while using our products. The wearer uses our products at their own risk with full knowledge of the risks involved in their activities.

Prices and specifications subject to change without notice.

Bonehead Composites does not install parts on helmets. If we do any repairs, they will be done when we have time to do them. The labor rate is $25.00 per hour with a 2 hour minimum. Call or email us for quote.

HOURS OF OPERATION:
 9am-5pm Pacific Time  -  Monday thru Thursday
9am-4:30pm Pacific Time  -  Friday
Closed on the weekends

Shipping and Mailing
Please use the following address

BoneHead Composites
3110 Indian Ave.   Unit D
Perris, CA 92571

Phone:  (951) 943-1166
Fax: (951) 943-3316
info@boneheadcomposites.com


 
 
HOME | PRODUCTS | ACCESSORIES | MILITARY | HELMET PARTS | CAMERA MOUNTS | BODY MOUNTS | ORDER FORMS | DEALERS 		 
   
  All content and imagery copyright ©2003-08 Bonehead Composites - JFChristopher Inc.
 Phone:  (951) 943-1166  -  Fax: (951) 943-3316  inquiries:  info@boneheadcomposites.com or Email The Webmaster