Click here to return to the Home PageClick here to return to the Home PageClick here to return to the Home Page  
  Click here for a complete listing of all BonEHeaD prioductsClick here for BonEHeaD dealer information or to find a dealerClick here for frequently Asked Questions about our productsClick here to find out about the latest new BonEHeaD products and moreClick here to return to the Home PageClick here to find out more about BonEHeaD's military productsClick here for downloadable forms for all BonEHeaD ProductsClick here for Shipping/Mailing info for BonEHeaD CompositesClick here to find out more about BonEHeaD Composites  
   
 

The latest innovation from BoneHead...

GOLDMEMBER is a precision machined aluminum camera quick release bracket that will easily mount to any surface you would normally attach a camera to.

With a simple pull of the locking piston ring, the center of the GOLDMEMBER slides out making it quick and easy...YET SECURE... to add and remove cameras (video and/or still cameras) whenever you want. Low profile pull-ring is small and not easily disengaged until you want it to!

Small, simple and rock solid, the new GOLDMEMBER is a powerful addition to any camera flyer's arsenal of equipment.

Comes complete with hard gold anodized Base Plate, Camera Plate, Camera Allen Screw, no skid camera grip surface and base plate flush-mounting hardware.

Available Accessories:

Click here for a list
all accessories available
for this helmet and others.

  • Additional mounting plates

  • D-Box Camera Enclosures

  • Shark Fin mounts, etc.
Weight:  < 5oz.
Retail Price: $85.00
 Complete Unit
or
$42.50
 for additional mounting plates.
Available at:  See Dealer list

WARNING: Please Read!
Bonehead Composites/JFChristopher Inc. has made every attempt to build our products to be as safe as possible. However, Bonehead Composites/JFChristopher Inc. is not responsible for any injuries or losses sustained while using our products. The wearer uses our products at their own risk with full knowledge of the risks involved in their activities.

Prices and specifications subject to change without notice.

Bonehead Composites does not install parts on helmets. If we do any repairs, they will be done when we have time to do them. The labor rate is $25.00 per hour with a 2 hour minimum. Call or email us for quote.

 

 

Click on images below to enlarge
 
GOLDMEMBER
Base Plate		   GOLDMEMBER
Camera Plate
 
GOLDMEMBER
Camera Quick Release
(Closed)		   GOLDMEMBER
Camera Quick Release
(Open)
 
GOLDMEMBER
Base Plate
(Bottom View)		   GOLDMEMBER
Camera Plate
(Bottom View)

USER-INSTALLATION NOTES
Before using your camera quick release:
Decide which plate you want to mount on to your camera and place the anti-skid cork between the camera and the plate(both are designed to be interchangeable). You will need to punch out the necessary hole in the supplied cork for the camera screw to go through.

Mounting your Gold Member:
Attach the plate with the cork, to the bottom of the camera with the enclosed screw, making sure it is tightened down securely. Take the remaining enclosed screws, washers and locking nuts and mount the base onto the L bracket, helmet, tripod etc.

Make sure all screws are tightened securely.
Once you have installed the base to the L bracket or helmet, slide the camera portion on to it making sure you jiggle it back and forth to know the pin is seated properly.

To release and mount your camera, pull the spring loaded pin straight out until it is pulled out enough to slide the camera on and off. 

 
 
HOME | PRODUCTS | ACCESSORIES | MILITARY | HELMET PARTS | CAMERA MOUNTS | BODY MOUNTS | ORDER FORMS | DEALERS 		 
   
  All content and imagery copyright ©2003-08 Bonehead Composites - JFChristopher Inc.
 Phone:  (951) 943-1166  -  Fax: (951) 943-3316  inquiries:  info@boneheadcomposites.com or Email The Webmaster